home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1997 July / EnigmA AMIGA RUN 20 (1997)(G.R. Edizioni)(IT)[!][issue 1997-07 & 08][EAR-CD IV].iso / lightwave / lwmlist / 94.lightwave-06 / 000077_owner-lightwave-l _Fri Jun 17 14:14:45 1994.msg < prev    next >
Internet Message Format  |  1994-07-31  |  2KB

  1. Return-Path: <owner-lightwave-l>
  2. Received: by netcom.com (8.6.8.1/SMI-4.1/Netcom)     id NAA02167; Fri, 17 Jun 1994 13:37:08 -0700
  3. Received: from relay3.UU.NET by mail2.netcom.com (8.6.8.1/Netcom)     id NAA17776; Fri, 17 Jun 1994 13:18:20 -0700
  4. Received: from uucp3.UU.NET by relay3.UU.NET with SMTP      (rama) id QQwusm15260; Fri, 17 Jun 1994 16:14:07 -0400
  5. Received: from capitol.UUCP by uucp3.UU.NET with UUCP/RMAIL         ; Fri, 17 Jun 1994 16:14:13 -0400
  6. Received: from sparc4.capitol by  capitol.com (4.1/SMI-4.1)     id AA06145; Fri, 17 Jun 94 16:05:40 EDT
  7. Date: Fri, 17 Jun 94 16:05:40 EDT
  8. From: capitol!staubly@uunet.uu.net (Vicky Staubly)
  9. Message-Id: <9406172005.AA06145@ capitol.com>
  10. To: lightwave-l@netcom.com
  11. Subject: Gigamem and MMUs
  12. Sender: owner-lightwave-l@netcom.com
  13. Precedence: list
  14. Reply-To: lightwave-l@netcom.com
  15.  
  16. Kim,
  17.     There are a couple of ways to find out whether your Amiga has
  18. the MMU which is required for virtual memory systems like Gigamem.
  19. In your tools directory, there may (depending on the version AmigaDos
  20. you have) be a program called ShowConfig. If you don't see "68030 MMU"
  21. in the display window, then you don't have an MMU. I think the program
  22. "CPU" which comes with some versions of AmigaDos, also displays this
  23. info.
  24.     The other way is to actually look at your accelerator board.
  25. Find the CPU chip (about 1" by 1" square). It will either say "M68030"
  26. (in which case you _do_ have an MMU), or "M68EC030" (in which case,
  27. you _don't_ have an MMU). Also, one thing I like to check in accelerator
  28. boards is the actual CPU rated speed (the max speed at which the CPU
  29. is guaranteed to run). After the part that says "030" will be some more
  30. letters and numbers (e.g. "RC50" or "FN25"). The numbers are the "rated
  31. speed" in MHz. Sometimes, manufacturers will put, say, a 25MHz rated CPU
  32. in a 28MHz board. This will _usually_ be alright, but sometimes a little
  33. extra cooling might be needed. If you notice occasional lockups when
  34. the computer is idle, that may be a cause. Also, if you have a floating
  35. point processor (68881 or 68882), you can do the same speed suffix check
  36. with it.
  37.     Anyway, I hope this helps.
  38.                     Vicky Staubly
  39.                     software engineer, CapDisc
  40.                     staubly@capitol.com